This is the reference sub “jl audio w7” bass


For high-performance automotive

The W7 platform has become a standard in high-end home jl audio w7. The W7 platform is used in our premium Fathom(r), and Gotham(r), powered home subwoofers. These have been highly rated and recommended by the top reviewers around the globe and are regularly used at the top recording and mastering studios.

The unique feature of A W7 is its ability deliver exceptional output, precise dynamics, and superb sound quality all at once. These performance capabilities are based on the core of loudspeaker design. This is where electromagnetic and mechanical behavior mix in fiendishly complex ways. JL Audio has spent a lot of time researching these behaviors and optimized W7 motors and suspension systems in order to reproduce every bass detail accurately and with unmatched linearity. Eight U.S. Eight patents have been granted for motor, suspension, and assembly technology used in W7’s.

Each W7 subwoofer built in Miramar, Florida is made to the highest quality standards using components from around the world. Each model is unique from the surround to the back-plate. Even the bolts and screws used for assembly were designed and made to our specifications.

It’s possible to be a bit obsessive but the pursuit of the best audio reproduction is something we pursue passionately through research and without compromise.

W7AE “10th Anniversarqy Edition”:

2011 was the tenth year of our flagship automotive subwoofer driver models. Each W7 model now comes in an “Anniversary Edition (AE) trim. It features a satin-black frame, bright-anoized trim rings, and special badges. The original silver-framed W7 drivers were discontinued.

JL AUDIO adds TW3 Thin Line Subwoofer and Dual 8 ohm Subwoofer

JL Audio is a pioneer in high-end audio solutions and has added dual 8-ohm impedance models for its TW3 thin-line subwoofers. Installers now have more options for wiring and impedance, including the ability of running two TW3 subwoofers at the same 2-ohm mono load.

The TW3 thin-line subwoofers continue to offer dual 4-ohm models in addition to the dual-8 ohm impedance. The TW3 subwoofer drivers are jl audio w7  available in sizes 10-inch and 12 inches. They use Concentric Tube Suspension technology, which allows for a very shallow mounting depth.

  • TW3 Dual 8 ohm Subwoofers:
  • 10TW3-D8: TW3 10-inch Subwoofer Driver (400 W, dual 8 O voice coils)
  • 12TW3-D8: TW3 12-inch Subwoofer Driver (400 W, dual 8 O voice coils)


  • Very shallow mounting depth (3.25 Inches / 3.50 inches).
  • No pole vent: Mounting close to the rear wall of the enclosure is permitted.
  • Small volume requirements for sealed enclosures
  • Very long linear excursion capabilities (0.60 in / 15.2mm, one-way).

DMA-optimized motor designs jl audio w7

  • Architecture of a “concentric tube”, a proprietary design
  • Patented “floating con attach method” technology
  • Cast-alloy frame
  • Cone of mica-filled, injection-molded polypropylene
  • Rubber surround
  • Aluminum-alloy dustcap and rear cover with JL Audio logo
  • Made in USA with global components

Other mobile products that will be introduced in 2017 include ultra-premium, high-end C7 component drivers, C1 component and speaker systems, new Stealthbox (r) subwoofer models, and additional ECS connector products.

  • W3v3

W3v3’s provide outstanding performance at medium power levels without the need for a large enclosure.

The latest generation of W3’s is enriched with a range of advanced technologies that were originally developed for the W7’s. Multiple patented technologies improve performance and reliability. These innovations make the v3 the most reliable and sounding W3’s.

The simple and elegant look of a mineral-filled polypropylene cone body combined with a JL Audio logo metallion is achieved by a simple, but stylish design. The mounting flange trim rings can be removed and customized to receive grille-mesh inserts. (Grille mesh inserts can be purchased separately).

W3v3’s manufactured in Miramar, Florida to high quality standards with global components are available in five sizes ranging from nominal diameters of 6.5 to 13.5 inches.

  • TW3

For applications that require depth, the world-class performance and superior sound quality are available.

The TW3’s build on the TW5v2 core technology and offer a powerful combination in depth mounting and excursion. They can actually provide more linear excursion than both the TW5v2 and deeper W3v3 subwoofers.

JL Audio’s thin line woofer technology allows this feat to be accomplished by compressing the TW3’s architecture using a “concentric tub” structure that is built into the cone body. This structure supports the spider and voice coil, while allowing for the larger motor structure to be placed further forward than in conventional designs.

TW3’s can be used in extremely small enclosures. They also have our tab-ear mounting design that maximizes cone area within their mounting footprints.

JL Audio bass can now be used in more applications.

JL Audio has been a leader in the belief that subwoofers are crucial and essential to any serious audio system for decades. We have always placed exceptional car subwoofers at the forefront of our minds. From the original 8W2 subwoofer in 1980, through the pioneering W1 and W6 subwoofers in 1990, to today’s wide range of models, our focus has been on sound quality, enjoyment, and music enjoyment.

Lucio Proni is the JL Audio CEO. He leads a highly skilled design team that works with industry-leading engineering resources to improve each generation’s performance. Their innovations have been granted U.S. patents as well as international patents. They give JL Audio subwoofers unmatched capabilities.

The following subwoofer jl audio w7 product lines are available in today’s lineup 

  • Subwoofers Full Frame
  • W7AE: The reference sub-bass for automobiles. Made in USA with global components
  • W6v3: Small enclosures with high output and exceptional sound quality. Made in USA with global components
  • W3v3: Excellence and reliability all-round. Made in USA with global components
  • W1v3 is well-suited to very small enclosures. Moderate mounting depth. Imported
  • W0v3: Outstanding value and performance jl audio w7  Imported
  • Thin-Line Subwoofers:
  • TW5v2 – Incredibly low mounting depth and high output. Made in USA with global components
  • TW3: Powerful, versatile, and great sounding. Made in USA with global components
  • TW1: Superior sound quality in small enclosures Made in USA with global components

JL Audio continues to expand its commitment to U.S. loudspeaker manufacturing. Six of the eight lines of car subwoofers are made in our South Florida plant. Our highly skilled workforce follows strict quality standards. They create products that can satisfy the most demanding audio enthusiasts… and our desire to make the best car subwoofers in the world. It’s how you play.

W0v3 10-inch jl audio w7 Subwoofer (300W, 4 O)

The rugged 10W0v3 is a reliable performer that has excellent linearity and excursion capabilities. It also offers a wide performance range jl audio w7  that places it at the top end of its price category. It has a 2 in. For enhanced power handling and reliability, the voice coil is 2 in.

The 10W0v3 can be used with amplifier power between 75W and 300W. It is compact enough to fit in a 0.65 cu. 18.4 l) in a sealed enclosure or 1.125 cu. ft. (31.9 l) ported enclosure. You can find detailed enclosure recommendations in the “Specifications” tab.


  • 8″ Car Audio Subwoofer
  • Peak: 1800 watts | RMS: 900 watts
  • Impedance: Dual 2 Ohm | Sensitivity: 82dB
  • Mounting Depth: 5.75″
  • 8″ Car Audio Subwoofer
  • Peak: 1800 watts | RMS: 900 watts
  • Impedance: Dual 2 Ohm | Sensitivity: 82dB
  • Mounting Depth: 5.75″
  • All-in-One Complete SDR Series Dual 10-inch Loaded Subwoofer Complete Bass Package
  • Peak Power: 2,400 Watts
  • RMS Power: 1,200 Watts
  • Includes x1 Skar Audio SDR-2X10D4 Dual 10″ Loaded 2,400 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier

  • Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling
  • High velocity under-spider frame vents
  • High Temperature copper voice coil wire
  • Black Aluminum 2.5” voice coil former for superior heat dissipation

  • All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
  • Peak Power: 1,200 Watts, RMS Power: 600 Watts
  • Includes x1 Skar Audio SDR-1X12D2 Single 12″ Loaded 1,200 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Amplifier
  • Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit